Capacitive touch sensor Mirrormaid

Capacitive touch sensor Mirrormaid

The MIRRORMAID Sensor is connected with miscellaneous kinds of electrics. For this, the external interface EXT offers several control cables. The sensor electronic is also part of the MIRRORMAID kit. The hook-up of the MIRRORMAID Sensor is realized through 30 meter connecting cable. The connecting cable's maximum length primarily depends on the cable's width and the hook-up of potentially required LEDs.

Thanks to the low power input it is also possible to operate the sensor with rechargeable batteries or regular batteries. A control LED displays the switching status. It is possible to individually adjust the operating mode (push button or switch) as well as the sensitivity (high, middle, low).

Hook-up MIRRORMAID Sensor

EXT - external hook-up 6-pole pole-connector (2-row) with the following configuration

GND = mass (ground)
OUT = inverted open-collector output against GND
LED = LED switch hook-up (low active)
OUT = sensor output signal (GND or VCC)
VLED = LED supply voltage (+12 V)
VCC = sensor supply voltage (+2,5 up to +5 V DC)

SNS - sensor hook-up
Solder connection for sensors

JP1 - jumper sensitivity
Jumper adjusting the sensors' sensitivity
Optional sensitivities: high - middle - low

JP2 - jumper switching performance
Jumper adjusting the switching performance
Optional switching performance: operation via pushbutton or switching

Technical Data

If desired, it is of course also possible to order material needed for constructing the sensors such as self-adhesive copper foliage and sensor wire. Our engineers and technicians are more than happy to inform and assist you in implementing your projects. Our services range from supporting the designing of products and projects to constructing complete samples and exhibits.

We are more than happy to assist you in integrating the MIRRORMAID Sensor electronics into your circuits. This way you save expenses on material and equipment.

	Download Mirrormaid touch sensor MM-S brochure
	Download Mirrormaid touch sensor MM-S manual (German)
	Mirrormaid Sensor application

Recommended products:

	Sensor adapter board FP-PRO-MMC 16 channel extensioncard for connecting sensors with flashplayers
	Interactive audio player IAP-1 Interactive Audioplayer with pushbutton / sensor connector
	Copper sensor foil To define the protected area of an object - works with sensors
	Multimedia controller Flexible controls for museums and exhibition
	Hardware development Because we can refer on a big pool in already existing solutions, your customised solution is usually in handy nearness.
	Consulting / Training / Presentations Even the most extensive brochure and the most detailed website can only portrait a small section of our portfolio while it remains staying theoretically. That’s why we put great effort – just like most of our products – on interactivity
	Radar Sensor 1Z Reacts on movement up to 2-3 m distance
	Video kit with 8 Touch Sensors, resolution 1280x720p This kit will play video clips whenever someone pushes one of the 8 Touch Sensors. This gives the ability to use 8 different video files
	Video kit with 10 Touch Sensors, resolution Full HD This kit will play video files whenever someone touches one of the 10 touch sensors. This gives the ability to use 10 different video files
	Speaking figurine made of Dibond Broadcasts audio files, whenever a visitor steps close to it.
	Speaking figurine Broadcasts audio files, whenever a visitor steps close to it
	Talking picture with touch sensor Broadcasts audio files just by touching the picture

This product is compatible with:

	Copper sensor foil To define the protected area of an object - works with sensors
	Radar Sensor 1Z Reacts on movement up to 2-3 m distance
	USB-Control USB-Control enables to connect sensors direct to a PC. It works like a standard PC usb keyboard
	Multimedia controller Flexible controls for museums and exhibition
	Sensor adapter board FP-PRO-MMC 16 channel extensioncard for connecting sensors with flashplayers
	26 Channel I/O Extension Board Add-on board for interactive audio and video players
	Interactive video player FP-PRO 1000i Flash Player with direct control inputs, integrated NF-amplifier 2 x 7 watts, relay output and program control

Customers who bought this product also bought the following products:

	Interactive audio player IAP-1 Interactive Audioplayer with pushbutton / sensor connector
	USB-Control USB-Control enables to connect sensors direct to a PC. It works like a standard PC usb keyboard
	Surface acoustic speaker LS-KS20 High-Quality Rendering of Vocal and Music Files through solid material, 8 ohm, 30 watt R.M.S. max. capacity
	External IR receiver External Infrared receiver for Smallwonder amplifier
	Radar Sensor 1Z Reacts on movement up to 2-3 m distance