Deutsch English

Capacitive touch sensor Mirrormaid

Capacitive touch sensor Mirrormaid
Zoom image

Price on request

Shipping time: prompt, short term

Product no.: MM-S
Capacitive touch sensor Mirrormaid

Capacitive touch sensor Mirrormaid

 

The MIRRORMAID Sensor is connected with miscellaneous kinds of electrics. For this, the external interface EXT offers several control cables. The sensor electronic is also part of the MIRRORMAID kit. The hook-up of the MIRRORMAID Sensor is realized through 30 meter connecting cable. The connecting cable's maximum length primarily depends on the cable's width and the hook-up of potentially required LEDs.

 

Thanks to the low power input it is also possible to operate the sensor with rechargeable batteries or regular batteries. A control LED displays the switching status. It is possible to individually adjust the operating mode (push button or switch) as well as the sensitivity (high, middle, low).

 

 

Hook-up MIRRORMAID Sensor

 

EXT - external hook-up 6-pole pole-connector (2-row) with the following configuration


GND = mass (ground)
OUT = inverted open-collector output against GND
LED = LED switch hook-up (low active)
OUT = sensor output signal (GND or VCC)
VLED = LED supply voltage (+12 V)
VCC = sensor supply voltage (+2,5 up to +5 V DC)

 

SNS - sensor hook-up
Solder connection for sensors

 

JP1 - jumper sensitivity
Jumper adjusting the sensors' sensitivity
Optional sensitivities: high - middle - low

 

JP2 - jumper switching performance
Jumper adjusting the switching performance
Optional switching performance: operation via pushbutton or switching

 

 

Technical Data

 

Total size:

55 x 16 x 10 (W x H x D in mm)

Weight:

ca. < 3 gram

Operating voltage:

+ 2,5 … 5 volt DC

Power consumption:

normal < 50 µA

Switching output:

Open collector

Delivery content:

Mirrormaid Sensor

 Technical modifications and errors reserved.
 
 

If desired, it is of course also possible to order material needed for constructing the sensors such as self-adhesive copper foliage and sensor wire. Our engineers and technicians are more than happy to inform and assist you in implementing your projects. Our services range from supporting the designing of products and projects to constructing complete samples and exhibits.

 

We are more than happy to assist you in integrating the MIRRORMAID Sensor electronics into your circuits. This way you save expenses on material and equipment.

 

 

Download Mirrormaid touch sensor MM-S brochure
Download Mirrormaid touch sensor MM-S manual (German)
Mirrormaid Sensor application
Capacitive touch sensor Mirrormaid

Recommended products:

Sensor adapter board FP-PRO-MMC

Sensor adapter board FP-PRO-MMC

16 channel extensioncard for connecting sensors with flashplayers

Interactive audio player IAP-1

Interactive audio player IAP-1

Interactive Audioplayer with pushbutton / sensor connector

Copper sensor foil

Copper sensor foil

To define the protected area of an object - works with sensors

Multimedia controller

Multimedia controller

Flexible controls for museums and exhibition

Hardware development

Hardware development

Because we can refer on a big pool in already existing solutions, your customised solution is usually in handy nearness.

 

Consulting / Training / Presentations

Consulting / Training / Presentations

Even the most extensive brochure and the most detailed website can only portrait a small section of our portfolio while it remains staying theoretically. That’s why we put great effort – just like most of our products – on interactivity

Capacitive Touch Sensor Kit

Capacitive Touch Sensor Kit

Mirrormaid Kit with power supply unit

Radar Sensor 1Z

Radar Sensor 1Z

Reacts on movement up to 2-3 m distance

Audio kit with 8 Touch Sensors

Audio kit with 8 Touch Sensors

This kit will play audio files whenever someone touches one of the 8 touch sensors. This gives the ability to use 8 different audio files

Video kit with 8 Touch Sensors, resolution 1280x720p

Video kit with 8 Touch Sensors, resolution 1280x720p

This kit will play video clips whenever someone pushes one of the 8 Touch Sensors. This gives the ability to use 8 different video files

Video kit with 10 Touch Sensors, resolution Full HD

Video kit with 10 Touch Sensors, resolution Full HD

This kit will play video files whenever someone touches one of the 10 touch sensors. This gives the ability to use 10 different video files

Speaking figurine made of Dibond

Speaking figurine made of Dibond

Broadcasts audio files, whenever a visitor steps close to it.

Speaking figurine

Speaking figurine

Broadcasts audio files, whenever a visitor steps close to it

Talking picture with touch sensor

Talking picture with touch sensor

Broadcasts audio files just by touching the picture

This product is compatible with:

Capacitive Touch Sensor Kit

Capacitive Touch Sensor Kit

Mirrormaid Kit with power supply unit

Copper sensor foil

Copper sensor foil

To define the protected area of an object - works with sensors

Radar Sensor 1Z

Radar Sensor 1Z

Reacts on movement up to 2-3 m distance

USB-Control

USB-Control

USB-Control enables to connect sensors direct to a PC. It works like a standard PC usb keyboard

Multimedia controller

Multimedia controller

Flexible controls for museums and exhibition

Sensor adapter board FP-PRO-MMC

Sensor adapter board FP-PRO-MMC

16 channel extensioncard for connecting sensors with flashplayers

26 Channel I/O Extension Board

26 Channel I/O Extension Board

Add-on board for interactive audio and video players

Interactive video player FP-PRO 1000i

Interactive video player FP-PRO 1000i

Flash Player with direct control inputs, integrated NF-amplifier 2 x 7 watts, relay output and program control

Customers who bought this product also bought the following products:

Capacitive Touch Sensor Kit

Capacitive Touch Sensor Kit

Mirrormaid Kit with power supply unit

Radar Sensor 1Z

Radar Sensor 1Z

Reacts on movement up to 2-3 m distance

Sensor adapter board FP-PRO-MMC

Sensor adapter board FP-PRO-MMC

16 channel extensioncard for connecting sensors with flashplayers

Full HD Solid-State-Videoplayer FP-PRO HD

Full HD Solid-State-Videoplayer FP-PRO HD

Flashplayer with HD-Resolution - plays MPEG 1/2/4 (H.264), WMV, MP3, JPG

This Product was added to our catalogue on Tuesday 20 January, 2015.

 Product search

Welcome back!

E-mail address:
Password:
Forgot your password?

Customer group


Customer group: Guest
You do not have the permission to see the prices, please create an account.

heddier top domains