The MIRRORMAID sensor is connected via a connection cable of up to 30 meters in length. The maximum length of the connection cable depends mainly on the cross-section of the cable and the connection of any necessary LEDs.
Due to the low power consumption, operation with rechargeable battery or battery supply is also possible. The indication of the switching states is done by a control LED. The sensitivity (high, medium, low) is also adjustable.
On request, we can supply you with the materials required to build the sensors, such as self-adhesive copper foil and sensor wire. Our developers and engineers will be pleased to advise you on the implementation of your task.
| Dimension: |
55 x 16 x 10 (W x H x D in mm) |
| Weight: |
approx. < 3 grams |
| Operating voltage: |
+ 2,5 ... 5 volt DC |
| Power consumption: |
normal < 50 µA |
| Switching output: |
Open collector |
| Connections: |
EXT - External connection 6-pole post connector
(2-row) with the following assignment:
GND = Ground,
OUT = Inverted open collector output to GND,
LED = LED switching connection (low active)
OUT = Sensor output signal (GND or VCC)
VLED = LED supply voltage (+12 V)
VCC = sensor supply voltage (+2.5 to +5 V DC)
SNS - Sensor connection, solder connection for sensors
JP1 - Sensitivity jumper, jumper to set sensor sensitivity
Sensor sensitivity Selectable sensitivities:
high - medium - low |
